Kinematics Engineering

Mild Steel Flat Bar

Home » Products » Mild Steel Flat Bar

Mild Steel Flat Bar

Kinematics Engineering supplies a wide range of Mild Steel (MS) Flat Bars. MS Flat Bars are used by Grating manufactures, cable trays, bright bar industries, automobile and auto-ancillaries, Truck trailers, Tippers, Railways, bus body, elevators and escalators, Scaffolding manufacturers, Base plates, Earthing material, Ship building, Washers, Flanges, Clamps and many more engineering industries.

MS Flats : Width 25 to 300 mm & Thickness 5 to 50 mm.

Product Specification

Size in mm	Average Weight
Size in mm	KG/MTR	KG/FT
20 x 4	0.79	0.24
20 x 5	0.79	0.24
21 x 6	1.00	0.30
25 x 3	0.59	0.19
25 x 4	0.79	0.24
25 x 5	0.98	0.30
25 x 6	1.18	0.40
25 x 8	1.57	0.50
25 x 10	1.9	0.6
25 x 12	2.36	0.70
28 x 6	1.30	0.40
30 x 3	0.71	0.22
30 x 4.7	1.11	0.34
30 x 5	1.18	0.40
30 x 60	1.40	0.40
32 x 5	1.26	0.40
32 x 6	1.50	0.50
32 x 8	2	0.60
32 x 10	2.50	0.80
32 x 12	3	0.90
38 x 3	0.90	0.30
38 x 5	1.50	0.50
38 x 12	3.60	1.10
40 x 4	1.26	0.38
40 x 5	1.57	0.50
40 x 6	1.90	0.60
40 x 8	2.50	0.80
40 x 10	3.10	1.00
40 x 12	3.77	1.20
40 x 16	5.00	1.50
40 x 20	6.30	1.90
40 x 25	7.85	2.40
45 x 12	4.20	1.30
45 x 20	7.07	2.15
50 x 4	1.57	2.00
50 x 5	1.96	0.60
50 x 6	2.36	0.70
50 x 8	3.14	1.00
50 x 10	3.90	1.20
50 x 12	4.7	1.40
50 x 16	6.28	1.90
50 x 20	7.85	2.40
50 x 25	9.80	3.00
50 x 32	12.56	3.83
60 x 6	2.83	0.87
63 x 6	3	0.9
65 x 5	2.55	0.78
65 x 6	3.06	0.93
65 x 8	4.08	1.2
65 x 10	5.1	1.6
65 x 12	6.10	1.90
65 x 16	8.16	2.5
65 x 20	10.2	3.1
65 x 25	12.8	3.9
65 x 32	16.33	4.98
65 x 40	20.41	6.22
65 x 50	25.51	7.78
75 x 5	5.7	1.7
75 x 6	3.53	1.10
75 x 8	4.71	1.4
75 x 10	5.89	1.8
75 x 12	7.70	2.10
75 x 16	9.42	2.90
75 x 20	11.8	3.6
75 x 25	14.7	4.5
75 x 32	18.9	4.5
75 x 40	23.6	7.2
75 x 50	29.44	8.97
80 x 8	5.02	1.53
80 x 10	6.28	1.97
100 x 5	3.93	1.2
100 x 6	4.71	1.4
100 x 8	6.28	1.9
100 x 10	7.85	2.4
100 x 12	9.42	2.90
100 x 16	12.56	3.8
100 x 20	15.70	4.80
100 x 25	19.60	6.00
100 x 30	23.55	7.18
100 x 32	25.12	7.66
100 x 40	31.40	9.57
100 x 50	39.25	11.96
125 x 6	5.90	1.80
125 x 8	7.90	2.40
125 x 10	9.80	3.00
125 x 12	11.80	3.60
125 x 16	15.70	4.80
125 x 20	19.60	6.00
125 x 25	24.50	7.50
125 x 32	31.40	9.57
125 x 40	39.25	11.96
130 x 12	12.25	3.73
150 x 6	7.07	2.20
150 x 8	9.42	2.90
150 x 10	11.80	3.60
150 x 12	14.10	4.30
150 x 16	18.80	5.70
150 x 20	23.60	7.20
150 x 25	29.40	8.90
150 x 32	37.68	11.48
150 x 40	47.10	14.36
160 x 30	37.68	11.94
178 X 6	8.38	2.56
178 X 8	11.18	3.41
180 X 12	16.96	5.17
180 X 20	28.26	8.62
200 x 6	9.40	2.90
200 x 8	12.56	3.80
200 x 10	15.70	4.80
200 x 12	18.80	5.70
200 x 16	25.10	7.70
200 x 20	31.40	9.60
200 x 25	39.20	12
250 x 6	11.80	3.60
250 x 8	15.70	4.80
250 x 10	19.60	6.00
250 x 12	23.60	7.20
250 x 16	31.40	9.60
250 x 20	39.20	12.00
250 x 25	49.10	15.00
300 x 6	14.10	4.30
300 x 8	18.80	5.80
300 x 10	23.55	7.20
300 x 12	28.30	8.60
300 x 16	37.70	11.50

Rolling Tolerances

Width	Thickness	Sectional weight	Length
Up to 50 mm: ± 1 mm 50 mm to 75 mm: ± 1.5 mm 75 mm to 100 mm: ± 2 mm 100 mm and above ± 2% and maximum not exceding 6 mm	Up to 12 mm: ± 0.5 mm over 12 mm: 4% and max not exceeding 1.5 mm	Up to 3 mm thick: +5/-3% Over 3 mm : ± 5%	For fixed length : ± 100 mm

Chemical compositions & Mechanical properties

The data given above is indicative. Actual weights may vary.

Kinematics Engineering develops specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.